All Features
Penelope B. Prime
Chinese goods seem to be everywhere these days. Consider this: At the Olympics in Rio this summer, Chinese companies supplied the mascot dolls; much of the sports equipment; the security surveillance system; and the uniforms for the volunteers, technical personnel, and even the torch-bearers.
Do…
Tannaz Mirchi
With airfares at their lowest point in seven years and airlines adding capacity, this year’s holiday air travel is slated to be 2.5 percent busier than last year. The system we use to coordinate all those flights, however, is decades old, and mostly depends on highly trained air traffic…
Greg Fox
It’s that time of year again. The time when eggs get nogged, pudding gets figgy, and it becomes socially acceptable to speak in rhyme. So on that note, and with apologies to Clement Clarke Moore, I bring you this timely and heartfelt public service announcement. Enjoy.
’Twas the week before…
Michael A. Witt
Editor’s note: This is part two of a two-part series. Read part one here.
While globalization has benefited humanity in many ways, its continued progress is in serious doubt. As I wrote previously, the two leading political science theories, liberalism and realism, both predict that globalization…
Joe Schlecht
According to the ISO/IEC Guide 99—“International vocabulary of metrology—Basic and general concepts and associated terms (VIM),” the traceability of a measurement result is demonstrated through a documented unbroken chain of calibrations, each contributing to the measurement uncertainty. This…
Mark Whitworth
For 17 years, ISO/TS 16949 was the leading standard for quality system requirements in the automotive industry. The technical specification was jointly developed by the International Automotive Task Force (IATF) and the International Organization for Standardization (ISO) in 1999. In October 2016…
Timothy Woodcome
Sponsored Content
If your organization has yet to make the transition from ISO 9001:2008 to ISO 9001:2015, you’re not alone. It’s estimated that less than 20 percent of the more than one million organizations certified globally have made the transition to the latest version of the standard (as of…
Kara Baskin
Care.com co-founder Donna Levin played a key part in that company’s growth, and the passion was personal. Levin’s work plans were curtailed when her son was 11 weeks old and had a seizure following a difficult pregnancy. Tests were inconclusive. Her daycare situation evaporated; she and her…
Sponsored Content
Manufacturers often hold suppliers to a rigid quality process that dictates tight controls on all raw materials. Nonconforming material can potentially halt the production line, wasting time and money. Unfortunately, material mix-ups are a reality in critical manufacturing…
American Customer Satisfaction Index ACSI
(ACSI: Colorado Springs, CO) -- Customer satisfaction with banks is up, according to the American Customer Satisfaction Index (ACSI). Its recent report covers the finance and insurance sector, which includes retail banks, credit unions, health insurance, property and casualty insurance, life…
AssurX
Life sciences companies around the world should make sure their corrective and preventive action (CAPA) plans are in good shape before a Food and Drug Administration (FDA) inspector comes calling. Looking at a deep pool of letters issued this year domestically and internationally, it’s clear the…
The new revision of AS9100D is now out, and clause 10.2—“Nonconformity and corrective action” will require us to “evaluate the need for action based on human factors to ensure nonconformities do not recur.” In addition, clause 7.1.4 of both ISO 9001:2015 and AS9100D require us to consider human…
Knowledge at Wharton
There were no Olympic medals up for grabs when Sim Yi Hui and Jane Lee, the co-founders of the Singapore Women’s Everest Team, set out to recruit team members to climb the world’s tallest mountain in 2004. “When we first formed the team my goal was just to climb the mountain,” Sim Yi Hui told me…
Suzanne Schwartz
During National Cybersecurity Awareness Month, which took place in October, the public and industry were encouraged to understand the importance of cybersecurity and to be vigilant when it comes to the technology we rely on every day, including helping patients remain confident in the safety of…
William A. Levinson
Sept. 22, 2018, is the deadline for registration to ISO 9001:2015, and this seems to allow organizations plenty of time to make the transition to the new standard. The good news is that, despite the radical changes to the standard’s structure, the underlying requirements are not particularly…
NIST
The U.S. Commerce Secretary, Penny Pritzker, has named four organizations as the 2016 recipients of the Malcolm Baldrige National Quality Award, the nation’s highest presidential honor for sustainable excellence through visionary leadership, organizational alignment, systemic improvement and…
Mike Richman
Hard as it may be to believe, a close analysis of our extensive trove of behavioral data on the Quality Digest user group indicates that more than a handful of you don’t regularly watch our regular weekly web TV show, Quality Digest Live, which broadcasts from our studio in Northern California…
ASQ
Sponsored Content
When flood waters ravaged portions of Colorado in September 2013—killing crops, inundating homes, and buckling many miles of roadways—countless federal, state, and municipal government workers sprang into action helping citizens. State and federal government agencies spent…
Cole Cooper
A production part approval process (PPAP) is used by companies to establish confidence and rules in a production process. In a sense, it gives customers a view into their suppliers’ manufacturing capabilities.
A PPAP is required when there is a new part, engineering changes, tooling changes,…
The United State Occupational Safety and Health Administration (OSHA) estimates that $60 billion is lost annually from workplace injuries and illness. Using the administration’s $afety Pays Program calculator, 20 carpal tunnel syndrome injuries will cost a company $1,260,000 in direct and indirect…
NIST
Until recently, if a company wanted the best measurements in the world for the physical dimensions of one of its dimensional standards, it had to book time on the NIST Physical Measurement Laboratory’s (PML) Moore M48 coordinate measuring machine (CMM). Operating at NIST since 2000, this CMM—…
Sudeep Pasricha
American mining production increased earlier this decade as industry sought to reduce its reliance on other countries for key minerals, such as coal for energy and rare-earth metals for use in consumer electronics. But mining is dangerous—working underground carries risks of explosions, fires,…
Michael Causey
It’s time to get your compliance programs in order to meet some looming international regulatory compliance demands, experts including former Food and Drug Administration officials say. Having a firm grip on quality management processes—especially document management and change control—will be…
Ryan E. Day
Handheld X-ray fluorescence (XRF) analyzers are proven analytical tools commonly used for the fast, easy, accurate, and nondestructive identification and analysis of metals and alloys. Common applications include metal alloy identification for quality control, scrap sorting and positive material…
Paula Oddy
Changes to the global economy during the last two decades have dramatically altered the landscape of business and industry. Globalization has enabled an ever-lengthening supply chain, which confers greater complexity and risk to every step of the process, whether for material goods or for services…