All Features
Guangnan Meng
Electrodes are essential components of modern lithium-ion batteries, which are used to power mobile electronic devices, electric vehicles, and many other products. The battery’s surface structure and engineering are directly related to its performance, life expectancy, and safety.
The batteries…
Ryan E. Day
In the manufacturing universe, metal tube fabrication is a world of its own. That being said, the requirements for developing a new world-standard solution for tube bending are common to all manufacturing—be faster, more accurate, and more economical.
With customers like Delta Air Lines, British…
Innovalia Metrology
Industry 4.0 has catapulted industrial production processes into new realms of advanced manufacturing, in some cases leaving quality control scrambling to catch up. The trend of industrial quality management is to implement lean and accurate production systems; however, for many enterprises, using…
Ryan E. Day
Machine-tool manufacturer Cincinnati Inc. has a heritage of building quality products and surviving great challenges. Founded in 1898, and based in the United States, Cincinnati has survived both the Great Depression and Great Recession. Cincinnati’s forward-looking attitude has been a key factor…
NIST
Researchers at the National Institute of Standards and Technology (NIST) have developed a method for evaluating and selecting optimal antenna designs for future fifth-generation (5G) cellphones, other wireless devices and base stations.
The new NIST method could boost 5G wireless network capacity…
Mike Richman
An industry, and even more so any individual company, is only as strong as its pipeline of incoming talent. This week on QDL we looked at this topic from a few different angles. Here’s what we covered at greater length:
“Ripped From the Headlines: Worker Shortage” A recent article on the Bloomberg…
Quality Digest
Annalise Suzuki, director of technology and engagement at software provider Elysium Inc., spoke to Quality Digest about the importance of model-based definitions (MBD) for data quality, validation, and engineering change management. With the increase of digital 3D models in the manufacturing…
Mike Richman
By any test, and certainly any measure, 2018 was a banner year for the Coordinate Metrology Society (CMS) and its keystone event, the Coordinate Metrology Society Conference (CMSC).
From the group’s founding in 1984 until today, the CMS has made a concerted and successful effort to support the…
Modern super-precision turning centers must provide accuracy in the lower range of diamond-turning machines (cylindricity of less than 1–2 μm) and high productivity. Traditionally, diamond-turning machines have not been able to provide this because of their design limitations. However, high…
Dirk Dusharme @ Quality Digest
In this episode we look at bioethics, next-gen manufacturing employees, and the death of Le Grand K.
What happens if customers want designer babies? We discuss the latest news about a Chinese researcher who claims to have edited the genes of two babies. Should society draw a line in the sand?
“…
Ryan E. Day
As of the 2010 Census, there were 27.9 million small businesses registered in the United States. That’s a lot of competition. To thrive and grow in such a competitive environment, business owners must make wise decisions, commit to high-quality results, and take care of their customers and…
Scott Sandwith
Industry 4.0 is the current hot trend in manufacturing, and one of the adjectives used to label new projects. The concept is primarily a way to describe how automation or “smart” systems enable manufacturers to drive costs down and increase quality. The sense of those words is magic to those…
NIST
A convocation of delegates representing 60 countries voted last month in Versailles, France, to implement the most significant change to the International System of Units (SI) in more than 130 years. For the first time, all measurement units will be defined by natural phenomena rather than by…
NIST
A convocation of delegates representing 60 countries voted last month in Versailles, France, to implement the most significant change to the International System of Units (SI) in more than 130 years. For the first time, all measurement units will be defined by natural phenomena rather than by…
3D Systems
In today’s hypercompetitive environment, companies can’t afford to lag behind when it comes to the quality of their products—or the tools and technologies they use to ensure them. During the past two decades, 3D scanning has become an essential component of many companies’ quality control…
Megan Ray Nichols
There is rising enthusiasm all over the country and the world when it comes to apprenticeships. According to the Bureau of Labor Statistics, from 2013 to 2017, the number of those participating in apprenticeship programs grew from 375,000 to almost 534,000, an increase of about 42 percent. In 2017…
Devshree Golecha
In this era of artificial intelligence, where bots can mimic human minds and outperform humans, a new-age process automation tool called “robotic process automation” (RPA) has been creating a lot of buzz. It is highly versatile and can be used by every industry to streamline and optimize their…
Mike Richman
Technological breakthroughs tend to change the way users perceive of a problem, offering a solution that, in retrospect, comes to seem obvious and apparent. So it is with the new FARO 8-Axis Quantum ScanArm and FaroArm.
“This is such an obvious solution to a challenge that every single portable-arm…
Mike Richman
Our industry embodies many aspects, but “Big Q” quality generally involves issues affecting management, measurement, and methodologies. This week on QDL, we covered all of them, and more. Let’s look closer:
“Ripped from the Headlines: Tariff Fallout” U.S. manufacturers are currently dealing with…
Eric Gasper
Measurement devices in manufacturing facilities are as ubiquitous as Skittles in trick-or-treat bags. Some companies have thousands of devices in their inventories and depend on them to provide accurate information. This is why timely calibration of all measurement devices is critical to…
Mike Richman
Leaders lead. Those two simple words conceal the complicated fact that being a change agent means confronting the failures of the past and confidently facing the promise of the future. Stories addressing these facts, along with hot takes on current news and a preview of an exciting upcoming webinar…
Gary Bell
It is all too common in the industry: A part design is created and sent out for production only to hit repeated snags as questions arise about datums, locators, symbols, and values. Even simple misunderstandings, such as where the geometric dimensioning and tolerancing (GD&T) lines terminate,…
Mike Richman
One of the highlights on our calendar each year is the first Friday in October, which is Manufacturing Day here in the United States. This event offers us the perfect opportunity to celebrate the centrality of manufacturing as a driver of the economy, innovation, automation, education, and lots…
The National Institute of Standards and Technology (NIST*) is a nonregulatory federal agency of the Department of Commerce and is the national metrology institute of the United States. NIST’s role in the development of voluntary consensus standards (VCS) is rooted in many policy decisions and…
Dirk Dusharme @ Quality Digest
During the past five to 10 years, the United States has seen more industry and academic institutions embrace apprenticeship programs. According to the Bureau of Labor Statistics, from 2013 to 2017, the number of those participating in apprenticeship programs grew from 375,000 to almost 534,000, an…