All News
(ASTM International: West Conshohocken, PA) -- Localized corrosion, such as pitting, cracking, or crevice corrosion, can be destructive to process equipment, but if it is detected early enough, potential damage can be minimized or avoided.
A new ASTM International standard provides a means for…
(ISO: Geneva) -- The first meeting of ISO’s new project committee PC 242, which is to develop an international standard on energy management, was held Sept. 8-10, 2008 in Washington, D.C.
The future ISO 50001 will establish an energy management framework for industrial plants, commercial…
(BSI: Reston, VA) -- In April, EPA issued a proposed rule requiring covered facilities to submit annual reporting of GHG emissions. In May, a law designed to establish a regulatory framework for a national carbon cap-and-trade system was introduced to congress. The impact of climate change to…
(BQPM: Newark, CA) -- Business & Quality Process Management, an innovative provider of consulting, training, and software tools that help companies create leaner and more effective organizations, is now offering a high-impact, three-day course on hazardous substance process management (HSPM).…
Failure mode and effects analysis (FMEA) is a systematic analysis technique that facilitates the identification of potential problems (failure modes) within a design or manufacturing process. Problems can then be ranked in order of importance to prioritize improvement actions. These actions are…
(USGBC: Washington) -- As part of LEED v3, the latest version of the U.S. Green Building Council’s (USGBC) program for green building design, construction, operations, and maintenance; buildings seeking LEED certification will begin submitting operational performance data on a recurring basis as a…
(Intertek: Boxborough, MA) -- Intertek, a leading global provider of quality and safety solutions, is working with medical device manufacturers who are currently under pressure to stay compliant under widespread changes to EU regulations.
The European Union has published a revision to its…
This is further information on the story released on July 1, 2009: http://www.qualitydigest.com/inside/quality-insider-news/iatf-releases-revised-version-isots-16949.html.
--Editor
(ISO: Geneva) -- ISO has just published a new edition of ISO/TS 16949:2009, which specifies quality system…
(BSI: United Kindom) -- Findings of a recent BSI survey show that a standard to help improve energy efficiency is much needed. Of 800 public-and private-sector UK organizations surveyed, only half rated their energy management practices as good or very good. This is despite 78 percent saying that…
(CSA Group: Toronto) -- Robert M. Griffin, president and CEO of CSA Group, recently announced that CSA Group has acquired SIRA Test and Certification Limited, a world leader in the conformity assessment solutions field that specializes in the testing of safety equipment used in potentially…
The Society of Manufacturing Engineers presents a new book from Michael J. Termini, Concept to Customer: Portfolio, Pipeline, and Strategic Project Management (SME, 2009). Termini wrote Concept to Customer in response to the many questions from project managers and novices who have sought his…
(NIST: Gaithersburg, MD) -- Senior leaders from the three organizations selected for the 2008 Malcolm Baldrige National Quality Award, as well as representatives from past award recipients, will share their best practices and results at one-day regional conferences on Sept. 15 in Milwaukee, and…
See updated story for 7/6/2009
(AIAG: Southfield, MI) -- The Automotive Industry Action Group recently announced the availability of the new ISO technical specification for the automotive supply chain. Developed by the International Automotive Task Force (IATF), the ISO/TS 16949:2009 standard…
It started slowly but surely. With the slump of the U.S. economy, companies started downsizing first by the dozens, then by the hundreds. Today, thousands of organizations across the country have in one way or another had to perform some kind of cost-cutting measure.
And as unemployment started…
(Hoffer Flow Controls: Elizabeth City, NC)—The Sanitary Design Turbine flowmeter from Hoffer Flow Controls meets the highest sanitary requirements for process liquid measurement including 3-A Standard 28-03. The sanitary meter is designed to provide outstanding accuracy in liquid applications…
There's a standard for everything. Really. Quality Digest's ever vigilant editors came across this relatively new one from ANSI. By the time this horse is tricked out with lights and signs its going to look like the Borg.
--Editor
From an ANSI news release:
Seeing a horse and a buggy can…
LEED (Leadership in Energy and Environmental Design) is an internationally accepted, voluntary certification program created by the United State Green Building Council. The program measures a building’s energy savings, water efficiency, CO2 emissions, environmental indoor quality, stewardship of…
(QuEST Forum: Dallas) -- QuEST Forum recently published the TL 9000 Quality Management System Requirements Handbook 5.0, the latest edition of the global quality standard used by the telecommunications industry. The new release of the handbook has an effective date of Nov. 15, to ensure adequate…
(NSF/Omnex: Ann Arbor, MI) -- Why are so many organizations receiving nonconformities in their ISO 9001:2008 audits? To understand the ISO 9001:2008 changes better, let's see if you know the answers to these three questions:
There are no changes made to ISO 9001:2008. True or False?
TRUE - ISO…
(SME: Dearborn, MI) -- The Three C’s of efficient manufacturing are common, common, and common,” says James E. Harbour, in his new autobiography, “Factory Man,” published this year by the Society of Manufacturing Engineers (SME). Harbour says implementing “common” will be a much greater challenge…
As the global market becomes increasingly integrated, customers demand that businesses have a superior level of quality and performance. In that respect, geographical location is becoming irrelevant, says Robert Chalker, American Society for Quality’s (ASQ) global managing director.
“The…
(The Modal Shop: Cincinnati) -- ASTM E2001-8 -- “Standard Guide for Resonant Ultrasound for Defect Detection in Both Metallic and Non-Metallic Parts” has been revised and released. Standardizing resonant inspection nondestructive testing (NDT) across different organizations, companies, and…
As part of President Obama's recently implemented National Fuel Efficiency policy, legislation regarding greenhouse gas emissions (GHG) is underway that could have a significant impact on some manufacturers. House Resolution 2454, the American Clean Energy and Security Act, sponsored by Henry…
(ANSI: New York) -- Just one month remains to submit nominations for the American National Standards Institute (ANSI)’s 2009 Leadership and Service Awards. Nominations are due by Friday, July 17 at 5:00 p.m. EDT.
The awards are presented annually as a part of World Standards Week to recognize…
The ISO 14064 series of standards for greenhouse gas accounting and verification was published March, 1, 2006, by the International Organization for Standardization (ISO). It is an international standard aimed at reducing greenhouse gas emissions, as well as for emissions trading.
According to…