All News
(Omnex: Ann Arbor, MI) -- Omnex has announced its latest webinar, “Enterprise Digitalization of Audits & Best Audit Practices.”
Date and time: Sept. 28, 2023, 11:00 a.m. Eastern
Speakers: Andrei Samoila and Roy Gray
Enterprisewide digitalization of audits has proved to be crucial for any kind…
(SwipeGuide AI: Amsterdam) -- Poorly crafted instructions can range from being a minor annoyance to posing serious hazards. It’s time to say goodbye to bad instructions and checklists on factory floors. Introducing SwipeGuide AI, a virtual instruction coach that ensures impeccable instructional…
(CIMdata: Ann Arbor, MI) -- CIMdata, a leading global PLM strategic management consulting and research firm, announces an upcoming free educational webinar, “Developing an A&D Digital Twin/Digital Thread Position—A Lesson in Consensus Building.” The hour-long webinar will take place on Thurs.,…
(Omnex: Ann Arbor, MI) -- Omnex has announced its latest two webinars, “ASPICE Standards Get Updated to PAM 4.0,” and “EwQIMS SP 11.2.0.3—Your Next Step in the Journey for the Digitalization of Quality.”
Webinar title: “ASPICE Standards Get Updated to PAM 4.0” Date and time: Aug. 24, 2023, 11:00 a…
(TalentLMS: San Francisco) -- As the influence of artificial intelligence (AI) and automation continues to grow in the workplace, a recent survey of human-resources managers conducted by TalentLMS sheds light on the required skills and the challenges faced by companies navigating the AI era.
The…
(CIMdata: Ann Arbor, MI) -- CIMdata, a global product life-cycle management (PLM) consulting and research firm, has announced an free educational webinar, “Complex Product Development Demands Data Governance.” The webinar will take place on Thurs., Aug. 10, 2023, at 11 a.m. Eastern and will last…
(Mistakesbook.com: Colleyville, TX) -- Mistakes are often seen as roadblocks to success. But what if they were actually the stepping stones to growth and innovation? Mark Graban, award-winning author and consultant, tackles this paradigm in his latest book, The Mistakes That Make Us: Cultivating a…
(Hexagon: North Kingstown, RI) -- New training technology now available globally from Hexagon’s Manufacturing Intelligence division leverages the power of its digital twins to help manufacturers train machinists and metrology specialists to use valuable shop-floor equipment. By combining hardware…
(MIT: Cambridge, MA) -- What do a student tinkerer in Bhutan, a design professional in Nairobi, and an artist in Brazil have in common? They’re part of a global community of makers benefiting from the Fab Lab Network, which provides the space, equipment, and training to make (almost) anything.…
(Aras: Andover, MA) -- Aras, which provides a powerful low-code platform with applications to design, build, and operate complex products, announces the latest version of its Variant Management application. This application delivers capabilities designed to manage product platform variability on…
(Omnex: Ann Arbor, MI) -- Omnex has announced its latest webinar, “Implementing Linked DFMEAs, and FTAs with EwQIMS”
Date and time: June 6, 2023, at 11:00 a.m. Eastern Speakers: Antony John, Mary Rowzee, and Nikhil Unnikrishnan
There are many effective product risk-analysis tools in various…
(NIMS: Fairfax, VA) -- The National Institute for Metalworking Skills (NIMS) has announced a new suite of Smart Standards for various job roles in various sectors of manufacturing. These standards are a starting point for any employer and educator developing or evaluating training in these…
(Siemens: Plano, TX) -- CNC professionals from around the world are taking advantage of Siemens free training paths, both hands-on and online. And the reason is clear. As an operator, you can gain the skills to maximize the output of your machine, increase your value to the business, and further…
(ASQ: Milwaukee) -- The environmental, social and governance (ESG) revolution has transformed global expectations for twenty-first century business. More than 90 percent of S&P 500 companies now publish ESG reports, yet there is little global consensus on the targets they must meet or standards…
(Omnex: Ann Arbor, MI) -- Omnex has announced its latest webinar, “CQI Assessments by OEMs–Cost vs. Reward.”
Date and time: May 11, 2023, 11:00 a.m. Eastern
Speaker: Craig Thompson
The AIAG Special Process CQI standards have been in place for decades. They have always been regarded as an…
(CIMdata: Ann Arbor, MI) -- CIMdata, a global PLM strategic management consulting and research firm, announced the publication of a white paper, “PLM Components,” centered on Siemens’ Digital Industries Software’s PLM Components solutions.
Software developers face many challenges when building a…
(AWP Safety: North Canton, OH) -- AWP Safety joined many others in construction- and infrastructure-related industries by raising awareness about the importance of safety in roadway work zones during National Work Zone Safety Awareness Week, from April 17 through 21, 2023.
“It’s our job to ensure…
(Omnex: Ann Arbor, MI) -- Omnex has announced its latest webinar, “Challenges in Maintaining Supplier Quality and How to Overcome Them.” Join Omnex for an informative and exciting discussion on how the supply chain and governance are critical parts of every industry.
Date and time: April 27, 2023…
(Business Expert Press: New York) -- How can business professionals adapt to an ever-changing landscape while maintaining, or even improving, work performance and product quality? A new book questions whether the current approach to managing quality is fit for purpose and offers practical ways to…
(RadCerts: Vancouver, WA) -- RadCerts brings radiation safety training to an online platform. The new multilingual courses allow management to train X-ray operators independently. General courses are available to fit most requirements, as well as state-specific courses for those with special…
(Patti Engineering Inc.: Auburn Hills, MI) -- Patti Engineering Inc., a leading control system integrator based in Auburn Hills, Michigan, with offices in Texas and Indiana, has announced details of an ongoing project at Kettering University. This will be in partnership with BorgWarner to develop…
(Additive Manufacturing Users Group: Chatsworth, CA) -- The Additive Manufacturing Users Group (AMUG) today announced the recipients of its scholarships. Dr. Les Kalman, assistant professor in restorative dentistry at Western University (London, Ontario, Canada), has been awarded the Randy Stevens…
(MIT Sloan: Cambridge, MA) -- MIT Sloan Executive Education is currently accepting applications for its Women’s Leadership Program, a new course designed to provide women leaders with the opportunity to deepen their leadership capabilities with a focus on critical mindsets and skills essential for…
(CNCMachines: Sanford, FL) -- A national CNC machine marketplace, CNCMachines.com helps manufacturers buy and sell used machines like CNC mills, CNC lathes, and fabrication machines.
The mission at CNCMachines.com is to help U.S. manufacturers upgrade their technology. To this end, the company…
(HEIDENHAIN: Traunreut, Germany) -- To assist in training the next generation of manufacturing professionals, ACU-RITE is offering deep discounts on its line of DROs and MILLPWR G2 CNC retrofit packages.
Additionally, HEIDENHAIN offers a collection of educational services and products to meet the…
