Body
The Coordinate Measuring Systems Conference Society recently announced its pick of 15 white papers to be presented at this year’s Coordinate Metrology Systems Conference. The event will be held July 18–22 at the Hyatt Regency Austin in Austin, Texas. The papers to be presented cover a wide spectrum of 3-D industrial measurement applications and topics that cater to the specific interests of manufacturers, engineers, scientists, quality control specialists, metrologists, educators and students.
The following selections will be presented at the conference:
- “Testing of a 2-m Antenna For Use On The New Horizons Mission to Pluto,” by John Troll, Johns Hopkins APL
- “6 Degrees of Freedom Dynamic Robot Verification at NASA Marshall Space Flight Center,” by Dennis J. Warren, Leica Geosystems Inc.
- “Measurement of the USS Monitor Propeller Using Structured Light and Coherent Laser Radar Scanning Technologies,” by Steve Hand, MAGLEV Inc.; and Bob Mongon, Accurex
- “Optics Accuracy and Gravity Deformation Measurements on a Large-Diameter Reflector Antenna System,” by Michael Brenner, Engineering Metrology Services; and Scott Imbery, General Dynamics C4 Systems
- “F-35 Joint Strike Fighter Electronic Mate and Alignment System,” by Ed Chalupa, Lockheed Martin
- “Large-Scale Metrology Design-Coordinate Generation and Verification,” by John K. Villanueva, Lawrence Livermore National Laboratory.
- “Digital Automated Panel Process,” by Michael O’Brian, The Boeing Co.
- “3-D From One Camera,” by Thomas Luhmann, Institute for Applied Photogrammetry and Remote Sensing
- “Survey and Alignment of the Fermilab Booster Accelerator,” by Babatunde O’Sheg Oshinowo, FRICS; and John Kyle, Fermi National Accelerator Laboratory
- “Application of Multiple Metrology Systems for Predictive Machining,” by Craig Farniok, Loft Tooling, Boeing St. Louis
- “Dimensional Management of Lay-Up Mandrels for the World Largest One-Piece, All-Composite Aircraft Fuselage,” by Craig Allen Cramer, Boeing Commercial Airplanes 787 Program
- “6-Degree Freedom With Portable Metrology Systems,” by Stephan Kyle, Metrology 3Plus
- “Adapting a General PCMM for a Specific Operational Military Application,” by Harald Suphellen, Metronor Harmolign; and Stephen ‘Dusty’ Rhodes BAE Systems
- “Traceability of ADM Measurements by Laser Trackers,” by Bob Bridges, FARO Technologies
- “Advanced Techniques for Photogrammetric 3-D Digitizing,” by Juergen Peipe, University of German Armed Forces
Established 21 years ago, the Coordinate Metrology Systems Conference is a five-day event held each year at a different location. It’s renowned for its comprehensive program of white papers and applications presentations given by worldwide industry experts.
For more information, visit www.cmsc.org.
Add new comment