Quality Video

Dyer Co.: Company and Products Overview

Dyer Co. is a technical leader in precision bore gages, ID/OD Groove gages, min-wall / thickness gages and special application gages.

 

www.dyergage.com

KEMA Registered Quality

Company profile of KEMA. This videos covers KEMA's wide range of ventures, from safety testing, certification and consulting, to applied research. In the area of registration. KEMA handles the following standards:

 

+ ISO 9001:2008

+ ISO 14001:2004

+ ISO 14064

+ ASRP Program

+ OHSAS 18001/Z10

+ AS9100

+ TL9000 R.4.0

+ TS16949

+ ESD S20.20

+ LEED STANDARDS

 

www.krqusa.com

PQSystems: CHARTrunner-m--Your SPC watchdog

Overview of CHARTrunner-m, a process monitoring solution that alerts you when a process is statistically out of control or outside a specified range. CHARTrunner-m allows you to follow more control charts at lower cost, and to focus your attention only when and where needed.

 

www.pqsystems.com/products/SPC/CHARTrunner-m/CHARTrunner-mTrialForm.php

Zeiss: DuraMax CMM

Demonstration of the Zeiss DuraMax CMM.

 

DuraMax is a compact 3-D measuring machine made for the shopfloor and production.

Fully shop hardened, it is the perfect replacement for gages and manual CMMs.

 

• Seamlessly integrates into any production environment

• No measuring lab required

• Small footprint and easy set-up

• Temperature stability up to +30ºC

• User-friendly CALYPSO CAD-based software

Glenbrook Technologies: MXRA Flouroscopic Camera

This is a fluoroscopic video made of a small finger in response to concerns about pediatric imaging. A Glenbrook Technologies fluoroscopic camera views a 50 mm field of view. Due to the sensitivity of the fluoroscopic camera, the source is operating at 35 kV to 50 kV at 150 mA, and the X-ray beam is tightly coned to just fill that 50 mm field. There is zero scatter to the operator. The dose rate to the finger while making the video was 25 mR/hr or about 0.4 mR/min.

 

MasterCAM X: In Use at Orange County Choppers

Jim Quinn, CAD/CAM engineer with Orange County Choppers describes how Mastercam X is used to program eight Haas CNC machines.

 

www.mastercam.com

ShapeGrabber Ai310 Demo

Concise demo of part inspection using ShapeGrabber's Ai310 laser scanner.

Shows how a part is inspected in a few minutes and compared to CAD drawing using Geomagic software.

 

www.shapegrabber.com

Juran Institute: Breakthrough with Lean and Six Sigma

In this video from Juran Institute, their clients discuss the benefits of implementing a lean Six Sigma program and some of the results they have achieved using the methodology. Joseph De Feo, Juran's president and executive coach, further outlines the benefits as well as the need for organizations to adopt the lean Six Sigma methodology to reach breakthrough levels of performance.

 

juran.com

Special Report: Hazardous Substance Process Management—Part 2

This is Part 2 of our series on hazardous substance process management.

 

In this episode we cover:

* Taiwan's electronics industry as the birth of Hazardous Substance Process Management

* Why Taiwan saw QC 080000 as a means to ease ROHS compliance

* The passing of ROHS-type legislation in California 

* How audits from registrars such as Intertek strengthen ROHS compliance

 

For more information and a free white paper on QC 080000 click here.

 

Technorazzi: CPM Labs--Torque Wrenches

In this episode, Craig Howell, owner and president of CPM Labs, shows us how to use and care for a torque wrench. 

 

* How to use them
* How they work
* Calibration
* How to care for them

* Also shown: torque transducers and torque display

 

SEND US YOUR SUGGESTIONS! Is there a tool or topic that you would like to see Craig cover? Send us your suggestion by clicking the CONTACT link in the upper right corner of this page.