Featured Video
This Week in Quality Digest Live
Management Features
Mike Richman
Our St. Paddy’s Day show featured no Irish themes but plenty of great quality content
Christopher Martin
When reminders become white noise
Mike Micklewright
How to overcome it in a kaizen culture
Timothy Lozier
Go beyond meeting what’s required, to doing what’s desired
Ryan E. Day
AWE Tuning integrates the FARO scanner to turn concept into reality

More Features

Management News
Modernizing the website and digital offerings
Leadership is not about job titles—it’s about action and behavior
Three phases and challenges
Learn the genba kaizen method by which all other kaizen is compared
Drastic organizational changes in 2016 resulted in record sales
By 2025, four levels of self-learning technology will be in play
Interlinked system provides seamless link from vendor to supplier on a single platform
Checklist helps safety managers and business leaders assess facility safety

More News

DeFelsko

Management

Coating Inspection and Certification Classes

DeFelsko hosts five SSPC training events this fall

Published: Monday, August 22, 2016 - 16:08

(DeFelsko: Ogdensburg, New York) – DeFelsko Corp., a U.S. manufacturer of coating-thickness gauges and inspection instruments, has been selected to host five Society for Protective Coatings (SSPC) training events beginning in November 2016. at its headquarters in Ogdensburg, New York.

These courses, to be held at DeFelsko’s headquarters in Ogdensburg, New York, provide comprehensive training on the principles and practices of coating inspection. 

Protective Coatings Inspector Program Workshop

This one-day workshop teaches the proper methods of equipment use for inspecting surface preparation and installation of industrial and marine protective coatings and lining systems on an array of industrial structures and facilities.
When: Nov. 3, 2016
Registration deadline: Oct. 12, 2016
Cost: $395 for SSPC members, $595 for nonmembers
Credits: 0.7 CEU

Using SSPC PA2 Effectively

This half-day workshop summarizes and explains the key highlights of SSPC PA 2—“Measurement of dry coating thickness with magnetic gages.” Attendees will learn to verify the accuracy of a dry film thickness magnetic gauge; measure the dry film thickness of a coating with Type 1 or Type 2 gauge; and describe and implement the procedure to determine if the film thickness in a given area conforms to the maximum and minimum levels specified. Includes a course exam.
When: Nov. 11, 2016
Registration deadline: Oct. 21, 2016
Cost: $195 of SSPC members, $295 for nonmembers
Credits: 0.4 CEU

Protective Coatings Inspector Program

Level 1
This five-day course thoroughly trains attendees in the proper methods of inspecting surface preparation and installation of industrial and marine protective coatings and lining systems on an array of industrial structures and facilities. Attendees should be prepared for an intense and fast-paced week of training with evening study to cover an extensive amount of information. Includes a course exam.
When: Dec. 5–9, 2016
Registration deadline: Nov. 14, 2016
Cost: $995 for SSPC members, $1,195 for nonmembers
Credits: 4.5 CEUs

Level 2
This six-day course thoroughly trains attendees in the proper methods of inspecting surface preparation and installation of industrial and marine protective coatings and lining systems on an array of industrial structures and facilities. Attendees should be prepared for an intense and fast-paced week of training with evening study to cover an extensive amount of information. The Protective Coatings Inspector (PCI) program meets the requirements of ASTM D 3276, the IMO Performance Standard for Protective Coatings, and the International Association of Classification Societies’ (IACS) Common Structural Rules (CSR). Includes a course exam and a certification exam.
When: Dec. 5–10, 2016
Registration deadline: Nov. 14, 2016
Cost: $1,395 for SSPC members, $1,595 for nonmembers
Credits: 4.5 CEUs

Level 3
This half-day exam identifies and awards recognition to individuals who have in-depth knowledge in the principles and practices of inspection of industrial coatings. Students passing the PCI Level 2 exams at 80 percent or higher and meet the prerequisites for PCI Level 3 certification can take the PCI Level 3 certification exam on day seven. A passing grade of 80 percent or higher on the written PCI Level 3 certification exam is required to become an SSPC PCI Level 3-certified coating inspector.
When: Dec. 11, 2016
Registration deadline: Nov. 20, 2016
Cost: $500 for SSPC members, $700 for nonmembers
Credits: N/A

To register for these courses, call SSPC at (877) 281–7772, ext. 2204, or register online here by entering “Ogdensburg” in location field and the course name (i.e., protective coatings; using SSPC) in course name field. For more information, contact DeFelsko sales manager Terry LaRue.

See the events page here.

Discuss

About The Author

DeFelsko’s picture

DeFelsko

DeFelsko Corp. a U.S. manufacturer of coating thickness gauges and inspection instruments, has been delivering simple, durable and accurate gauges since 1966. Family owned and operated in northern New York, their state-of-the-art facility houses research, development, manufacturing, quality, sales, and service departments. At present DeFelsko has more than 70 models of coating thickness gauges and inspection instruments designed with unequaled handling characteristics and easy, trouble-free operation. They are simple to use and employ leading-edge technology, and come with a 30 day money-back guarantee.