From Sheffield Measurement, a brand of Hexagon Metrology Inc:
Sheffield Pioneer entry level air bearing coordinate measuring machine product overview.
Dyer Co. is a technical leader in precision bore gages, ID/OD Groove gages, min-wall / thickness gages and special application gages.
Company profile of KEMA. This videos covers KEMA's wide range of ventures, from safety testing, certification and consulting, to applied research. In the area of registration. KEMA handles the following standards:
+ ISO 9001:2008
+ ISO 14001:2004
+ ISO 14064
+ ASRP Program
+ OHSAS 18001/Z10
+ AS9100
+ TL9000 R.4.0
+ TS16949
+ ESD S20.20
+ LEED STANDARDS
Overview of CHARTrunner-m, a process monitoring solution that alerts you when a process is statistically out of control or outside a specified range. CHARTrunner-m allows you to follow more control charts at lower cost, and to focus your attention only when and where needed.
www.pqsystems.com/products/SPC/CHARTrunner-m/CHARTrunner-mTrialForm.php
SmartGD&T
An Advanced Beginner's Course
Presented by Bill Tandler, founder and president of Multi Metrics Inc.
Produced by Quality Digest and Musselman Pictures at the 2008 CMSC in Charlotte, North Carolina.
Episode 6 Content:
* Feature Control Frame Anatomy
All episodes:
Demonstration of the Zeiss DuraMax CMM.
DuraMax is a compact 3-D measuring machine made for the shopfloor and production.
Fully shop hardened, it is the perfect replacement for gages and manual CMMs.
• Seamlessly integrates into any production environment
• No measuring lab required
• Small footprint and easy set-up
• Temperature stability up to +30ºC
• User-friendly CALYPSO CAD-based software
SmartGD&T
An Advanced Beginner's Course
Presented by Bill Tandler, founder and president of Multi Metrics Inc.
Produced by Quality Digest and Musselman Pictures at the 2008 CMSC in Charlotte, North Carolina.
Episode 5 Content:
* Basic Dimensions
* Material Condition Modifiers
* Actual Values
All episodes:
This is a fluoroscopic video made of a small finger in response to concerns about pediatric imaging. A Glenbrook Technologies fluoroscopic camera views a 50 mm field of view. Due to the sensitivity of the fluoroscopic camera, the source is operating at 35 kV to 50 kV at 150 mA, and the X-ray beam is tightly coned to just fill that 50 mm field. There is zero scatter to the operator. The dose rate to the finger while making the video was 25 mR/hr or about 0.4 mR/min.
SmartGD&T
An Advanced Beginner's Course
Presented by Bill Tandler, founder and president of Multi Metrics Inc.
Produced by Quality Digest and Musselman Pictures at the 2008 CMSC in Charlotte, North Carolina.
Episode 4 Content:
* Datum Features
* Datum Feature Simulators
* Datums
* Datum Reference Frames
All episodes:
Jim Quinn, CAD/CAM engineer with Orange County Choppers describes how Mastercam X is used to program eight Haas CNC machines.
